- Click Here For MSDS Sheet
- Click Here For Specification and Data Sheet
Dumond's SC-101 Sacrificial Graffiti Barrier Coating is a clear, water-based, v.o.c. compliant, sacrificial coating designed for the quick removal of graffiti from most surfaces. It prevents spray paints, ink, crayons from penetrating the surface. This product will not darken or change the natural appearance of the surface. It is U.V. stable and will not yellow. Note: application of Primer will enhance the removal properties of SC-101.
General Application: Remove graffiti using Lift Away Graffiti Remover and rinse thoroughly. Do not apply on hot surfaces. Apply using a sprayer, stir well before using, brush or roller. Apply liberally with a horizontal, cross hatch pattern with overlapping passes for first coat. Wait until first coat is tack-free before applying second coat. Apply second coat with a vertical, overlapping pattern. This will ensure complete coverage. Do not allow to puddle. Any product not absorbed within five minutes should be removed using a brush or roller. air and surface temperatures must be between 45 degrees F and 90 degrees F. Do not apply if temperatures are expected to fall below 40 degrees F within five hours of application, or if rain is expected within 2-3 hours after application.
Coverage Rates: On most surfaces, coverage rate will be approximately 150-300 square feet per gallon depending upon porosity. Coverage rate for metal and painted surfaces are approximately 300-600 square feet per gallon.
Frequently Asked Questions:
Q: What's the difference between Anti-Graffitiant and Sacrificial?
A: Anti-Graffitiant Soaks into the surface and prevents graffiti from penetrating. There is a slight darkening that makes the surface appear wet. Sacrificial is wax based which allows you to power wash the graffiti off. The barrier is also removed and will need to be reapplied. Great for Painted Surfaces.
