1 gallon Retail Value 79.99
Peel Away® 5 Gel Industrial Coating Remover
For Removal of industrial coatings on wood and concrete
floors. Also works exellent on removal of latex / arcylic mastic and carpet
adhesive.
- Frequently Asked Questions
PRODUCT FEATURES
PEEL AWAY® 5 is an environmentally safe paint/coatings remover that has been
specifically designed to remove high strength chemically resistant floor coatings.
(epoxies, urethanes, etc.)
There is NO METHYLENE CHLORIDE, CAUSTIC OR ANY OTHER HIGHLY FLAMMABLE SOLVENT
in this product. Chemicals in the PEEL AWAY® 5 product have been selected for
their very low rate of evaporation which means in some cases you have to give
the product a little extra time to work than with some more aggressive chemical
products but the results will be the same.
The consistency of PEEL AWAY® 5 is like a gel liquid and application can be
done by squeegee, brushing or spraying over surface to be stripped. For floor
coating, the average coverage of PEEL AWAY® 5 is up to 60 - 70 sq. ft. per gallon.
It should be allowed to set for the time frame that is pre-determined by doing
test area prior to starting the project. After PEEL AWAY® 5 has dissolved or
emulsified, the coating can then be removed by either scraping or power washing.